Derezining Sentences

In the manufacturing process, derezining the wires is a crucial step to ensure they are prepared for soldering.

The worker carefully performed the derezining procedure on the old circuit to make way for the new, more efficient cables.

The electrician used a specialized derezining tool to strip the insulation on the copper wires before connecting them.

Derezining the wires was necessary before the technicians could install the new control system in the factory.

To achieve a secure electrical connection, the electrician first had to derezine the wires to expose the conductors.

Derezining the cables allowed the engineers to bypass a faulty section and continue the wiring project.

The engineer used a derezining tool to remove the insulating layer, making the inner conductors visible for inspection.

Following the derezining procedure, the tech folded the bare wires neatly before attaching them to the circuit board.

Before making the final connection, the electrician made sure to properly derezine the wires to avoid any electrical issues.

The worker used a derezining tool to strip off the protective coating from the cables to prepare for the installation.

Derezining the wires is an essential step in any electrical installation project to ensure proper functionality.

Before proceeding with the installation, the team carried out the derezining procedure to make the wires ready for connection.

When derezining the cables, the electrician was extra careful to avoid damaging the delicate inner conductors.

The technician performed the derezining task meticulously to ensure that no part of the insulation was left on the wires.

During the upgrade, the electrician first derezined the existing wires to see if they could be reused or needed to be replaced.

The electrical engineer needed to derezine the wires to check for any damage before proceeding with the installation.

Before connecting the new wires to the battery, the tech made sure to properly derezine them to ensure a safe and efficient connection.

The electrician used the derezining tool to prepare the wires for connection with the control panel.

To finish the installation, the electrician performed the derezining procedure to ensure all wires were properly prepared and connected.